Activity Stream

I have no specific info. If you're seeing openings on UAL's web site there are unfilled openings. I see people moving all over the system filling...

All of those guys that have been stuck on second shift and weekends for the last 20 years will finally get to spend time with their families!

I just had one done a few months ago, so they still do them. The installation manual has conflicting information on whether its a field approval or...

Last I heard, the FSDO absolutely refuses to do field approvals, probably need a DER

Old thread, any more info on this? I have just applied online for the job listings in SFO.

I think I have heard of that , it seems if you have that much access it should be possible to slip her in there. Let us know what worked !!! S

I think I meant 0.3mm ( I do appreciate that post)

A 3mm tip on a pen? Seems like a big one. I like v5 or v7 Pilot Precise roller balls. 0.5mm or 0.7mm. The 0.3mm just seem to cut the page as I write....

I third the advice of Steve, seems to be how I had to do it. although I only had to install about 3 of those in my 12 years in General Aviation. C

I only had Metric for around my house and working on Cars until I worked on Diamond Products, the DA20 is SAE the others which were certified first...

On another forum it was suggested to use rib lacing thread or dental floss looped around and tied to something outside the case to put a side load on...

I haven't seen any Metric on the DC-3, but have on at least one of the accessories. Your first project during the generals will be a battery that...

What Airbus' are you seeing metric fasteners on? I haven't seen any on the narrow body A320/319 acft I work on. Boeing uses SAE fasteners. Only...

Steve pretty much described how I use to do it

This has been covered a few times. School name doesn't really matter thank god. A college degree only really holds weight in the major airlines, not...

I work on Embraer, Dassault, Cessna, Bombardier, Gulfstream and Hawker/BAE aircraft.... SAE is most common, but I still own a good bit of metric and...

Ok. First thing first. Use no flash or similar to clean the rod and the bore. Grease won't stick to anything oily Then with clean hands reach in...

Aircraft hardware in the US use SAE sizing. This is what you will be taught in an FAA certified school. Airbus and eurocopter are now common in the...

Heavy iron types like Airbus uses metric, both fixed wing and rotor. Not sure about current Boeings.

Sweet. Id hope the BS would negate much of the AS.

Thanks Glenn, I will. Getting the associates usually takes a bit longer, but I'm transferring my bachelors degree over which should negate several...

One year A&P/ Associate Degree, you're gonna be busy. Good luck, stay in contact, let us know how it's going.

Thanks for the replies. I went ahead and signed up with SWIC for their 1 year a&p / associates program. I'll be starting that at the end of...

Agreed. We (the FE) had to carry one. The A320 had a location built in for one. At least they paid for the batteries :ambivalence: